#####################################
#
# Layout:  FTDI FT2232H example
#   ADBUS0 TCK
#   ADBUS1 TDI
#   ADBUS2 TDO (input)
#   ADBUS3 TMS
#   ADBUS4 nTRST
#   ADBUS5 nSRST
#   ADBUS6 OE (active high) for TRST, TDI, TMS, TCK
#   ADBUS7 DBGREQ_L


interface ftdi
ftdi_vid_pid 0x0403 0x6010
ftdi_channel 0

###### interface config 0
# just TCK TDI TDO TMS
# ftdi_layout_init 0x0008 0x000b

###### interface config 1
# ADBUS6 no used
ftdi_layout_init 0x0098 0x00bb; # initial data, port direction (1-out, 0-in)
ftdi_layout_signal nTRST    -data 0x0010 -input 0x0010
ftdi_layout_signal nSRST    -data 0x0020 -input 0x0020
ftdi_layout_signal DBGREQ_L -data 0x0080 -input 0x0080


# -data   can drive to  1 & 0
# -oe     can only drive to 0 / high-z, can't drive 1
# -input  can use cmd ftdi_get_signal to get signal value